Professional Overhead Line Stringing Manufacturer;
Undergroud Cable Pulling Tools Supplier.
|
Product Details:
Payment & Shipping Terms:
|
| Model: | EP430 | Type: | Hydraulic Crimping Tools |
|---|---|---|---|
| Apply: | 50-400mm2 Al Cu | Pressure: | Max 12T |
| Form: | Hex | Oil: | 145cc |
| High Light: | hydraulic crimping tool for electrical cables,hydraulic wire crimping tool |
||
EP-430 Hydraulic Cable Crimping Tool For Aluminum Copper Cable Lug 50-400mm2
Hydraulic cable lug crimping tools EP series specificaitons
| Model | EP410 | EP430 | EP510 |
| Pressure max | 12T | 12T | 13T |
| Range mm2 | 35-300 | 50-400 | 50-400 |
| Pressure form | Hex | Hex | Hex |
| Oil | R32 | R32 | R32 |
| Oil volume | 145CC | 145CC | 145CC |
| Packing box | Plastic | Plastic | Plastic |
| N,W/G.W | 6.8/10.4KG | 6.96/10.56 | 6.96/10.56KG |
| Open range | 30mm | 32mm | 38mm |
Selling points of EP:
1) C type head design: Easy to put and take out terminals;The upper die is fixed by the pin, and the lower die is fixed by the marble. The pressure film is stuck against the marble to prevent it from falling off during the decompression process. The mold can be removed with a strong push of the hand;
2) Switch of the mould: When the pressure is finished, clockwise twist the handle 45 degrees, close the handle, push back the oil valve switch, the mold can be returned
3) Big piston core+ return oil valve switch: Two-speed design, using two-stage hydraulic technology, low speed, high speed, no load when the pressure film quickly pressure to the position of the nose, pressure began to rise, to slow speed, until the nose pressure is completed
4) Insulated handle,It can withstand pressure of 20KV for 5 minutes
Contact Person: Ms. Cathy
Tel: 8615958291731
Fax: 86--86806158-020
